Completely rebuilt 1967 Buick Skylark 2-door hardtop rolling chassis and body

Buick Skylark 1967 Description

· Original one owner, traight, ever damaged 70,432 mile vehicle

· Has clear MA title

· Frame and suspension fully cleaned and POR-15 coated

· Body undercoated

· All rust (some body, imited floor spots, runk) cut out and replaced with welded sheet metal - Minimal filler used in quarter panels

· All new metal primed and wet sanded with great attention to detail

· Floor coated with POR-15 paint

· Trunk floor replaced and covered with new liner

· Engine compartment cleaned and painted

· New steering box

·All new urethane suspension bushings throughout

· New performance roll bars and bushings

· All new brake components

· All new steering linkages

· New wheel bearings

· New ball joints

· SS brake lines (full set)

· New master cylinder

· New springs (performance)

· New shocks (performance)

· New heater core

· Custom aluminum rear trailing arms

· VERY RARE brand new Auburn limited slip differential

· Completely rebuilt rear end (bearings, hims, eals)

· Aluminum TA performance rear diff cover and bridle

· New rear package shelf

· Glass is good

· Headliner is good

· Doors are straight

· Original hub caps in good condition

· All windows work correctly (back fold down to create the "hardtop" look)

· Door panels are in good shape

· Dashboard and back seat in very good condition

· Needs carpet and backing

· Front seat complete but needs re-covering

· Needs engine and transmission (have driveshaft)

· Originally had 300 V-8 and 2-speed auto

· Have original wiring harness

· All chrome off for painting (have 100% of original chrome / bright work)

· All lights, tc are in good shape

· Stored in a garage since new, t's been sitting in a large dry shed for the last 10+ years As you can see there has been a tremendous amount of time and money invested in this chassis. Basically everything under the car is brand new. This was my Grandfather's car that he bought new but at this point the project has stalled and it needs a new owner. All it needs now is an engine and transmission, paint job, nd the project completed. I had envisioned a fuel injected LS engine since the mount swap kits are still available but that is up to the next owner. E-mail for more pictures (be specific as to what you want to see, t is stored in a large shed and access is limited). Better yet, sk to come and see it if seriously interested. Buyer will need to trailer it away.