1977 Chevy 3/4 ton lifted 4+4 flatbed

Chevrolet C/K Pickup 2500 1977 Description

This 4+4 is ready to go. Just about where ever you want. It has been down to the rails and reassembled as a functioning work truck. It is not a show truck but it shows pretty well none the same. No rust except where the frame paint has some surface rust onthe back side. Just started showing last year. No rust on the cab and no bondo. Let me give you the bad first. If you are short you will have trouble getting up in. Have a lap belt on the drivers seat but nothing else. Thereare seat belts in the tool box. Wouldn't help much in the box if you didn't keep the shiny side up. The speedo doesn't work. Fixed it a couple of times and gave up. Drive by the tac. Plastic around the dash has a little chunk out of it. A couple of the micro switch indicator lightsdon't work. Up is on and down is off. Cant think of anything else bad. The good starting from the back. The rear bumper is indestructible. Seriously! The flat bed was custom made and it too is super heavy duty. I put 6 D rings in and tore up a new drill and hole saw in the process. About a $200.00 project. The tool box is bolted down and could be strapped, rings on each side,incase the trailgets rough. Headache rack and roll bar. The rear break drums are the larger ones and the breaks are new all around Thedrive shafts are new, he springs are new, in lift High Jackers. 5 new shocks. New Zoom clutch set up. New radiator, ew exhaust. The running gear is all in good shape. All gear transfer case, speed with granny gear. Engine is a 350 with a Quadra Jet and long tube headers. Runs strong. Burns an insignificant amount of oil and has a couple small leaks. Not worth mentioning but I wantto beup front. I have been on the receiving end of a couple ofnot so honest descriptions.Front end was redone and is tight. It has 3 gas tanks.Not a misprint. One on each side and a Blazer tank in the back between the frame rails. All fill separately from the out side. There are two electricvalves in parallel that are controlled by interior switches.No manual valves. I put in 3 fuel gages so I can monitor all tanks at once. No confusion on how much gas you have on. I am guessing it hold about 50 gallons. And the tanks are nearly full. Tires are good, aybe 85%. Cab has new hood, rontfenders, ront bumper,door seals, indow seals, adio. There is more but I think you get the picture. This truck could be driven wherever you want but if you have not had experience with a lifted truck be somewhat cautious. I will need good money in my hands before it leaves. Ask Questions. Why am I selling? To many projects like everyone else. Clear Title.