1972 Dodge Demon Pro Street

Dodge Demon 1972 Description

This car has been relisted due to? If you have some question about this vehicle please contact me and ask me. As before....if you wife,girlfriend, r your Mom wont let you buy this car then don't bid. If there is a big problem purchasing this carthenplease let me know, t will save us all a lot of trouble.

Just to be sure I made this point. This is a very fast Pro-Street car. It is licensed to drive on the street and can be driven anywhere and in any traffic. Itdoesn'toverheat in traffic or out on the road.

Street strip Dodge Demon drives great.Engine stays cool on the street.Never raced since new transmission installed and engine freshened. No runs on the Torque converter, ngine, r Detroit Locker. Engine has 11.5 CR and runs on pump gas. Yes this is possible because cam overlap reduces piston pumping pressures at low RPM, nd prevents detonation.

Car had great loping idle and starts on first turn.Garage kept and no rust on body.Car was originally a 340 Demon

Engine is built 440 RB block with forged steel crank and rods. Bored and stroked to 493 Cubic Inches. Ported Edelbrock heads, olid roller cam, luminum roller rockers,Titaniumvalve spring retainers, ictor 440 intake with 1100 CFM Dominator custom tuned carb. Aftermarket ATI transmission withreversevalve body and 8" Tree Master torque converter. Car is plumbed with all Stainless Steel Teflon braided hose. Full roll cage, iberglass seats, nd 4 point harness belts. MSD distributor and ignition (rev Limiter) with Autometer Gauges, ach and rev light. NOS plumbing installed.

Interioris excellent condition, ew carpets, unctioning dash gauges.

1972 Dodge Demon Pro Street

493 ci Stroked 440 Machine work by Burtonsville Machine, 70 HP est.

Custom Front Mount Engine Plate

Edelbrock performer RPM Aluminum Heads, orted by Burtonsville Machine

JE Pistons 131180

Eagle 4340 Forged Crank EAG444041506760

Eagle 4340 Forged Rods EAGCRS6760C3D

Gary Williams 9375 Race Prepped 1050 Dominator set up for 1100 CFM

Edelbrock RB-Engine Victor 440 Intake with

Bullet Cams Custom Grind, BRE On-Trac, /RB Roller cam, rind #RB/B-CRB-3-309/310-R8

CompCams Solid Roller Lifters

Custom High Strength Roller Rockers

Chrome Moly Push Rods

MSD Ignition /w Rev Limiter, SD distributor

Auto-Meter Tach /w Shift Light

Moroso Fuel Block and Regulator

Dual Rear Mounted Fuel Pumps

Braided Stainless Steel Fuel Lines

Braided Stainless Steel Engine Lines

Braided Stainless Steel Oil Cooler Lines

Aluminum Water Pump

Aluminum Radiator

ARP Bolt through out

ATI 727 Torqueflight pn 721320 Competition Transmission, ith Reverse Manual Valve Body

ATI 727 8” Tree-Master Torque Converter SS#C-3008704

Cheetah Shifter with Reverse Manual Valve Body

Eaton Detroit Locker, TL-187SL14A, 30 spline axles

Denny’s Drive Shafts,Chromolywith 1330 U Joints

StrangeChromolyDrag Race Axles, ith Mancini Racing "Green Bearing" Rear Axle Bearing Set

Aftermarketfront upper control arms with adjustable drag shocks.

Rear Coil-Over shocks on leaf springs with adjustable rear links

Mickey Thompson ET Drag Street Slicks

Full Roll Cage and Fiberglass Seats with 4-point harness

Custom Fiberglass Lift-Off Hood

Youtube Additional Videos:

https://youtu.be/FZvX9zUOc8I

https://youtu.be/21wG2GozAvE

https://youtu.be/W_EqYEWqtZA

https://youtu.be/hv452-6cmNI

https://youtu.be/X9-t9XBmTkk